Cloud Chorus by Signalsmith Audio is a free macOS chorus plugin that uses a multi-stage ensemble design to build a dense, layered cloud of detuned echoes, and it's one of the more thoughtful free tools in this category.

Quick verdict: You're on a Mac, you need something between a subtle chorus and a fully diffuse spatial wash, and you don't want to spend anything. Cloud Chorus earns a 4.0 out of 5 for how much control it packs into what is, structurally, a free plugin. The attack envelope-follower alone separates it from most of its price bracket. The hard limit is format: VST3 on macOS only. If that's your setup, it's a no-brainer. If it isn't, nothing else in this review matters.

What's In The Box

Cloud Chorus runs as a VST3 plugin on macOS 10.14 Mojave or higher. It won't install on Windows, and there's no AU or AAX version.

Inside, you get a multi-stage ensemble chorus design built to stack echoes into a dense cluster. The main controls are depth (up to 100ms maximum), independent detuning, and a phasiness slider that moves between two distinct detuning modes. Blending those modes is where the character lives.

The attack control is the clever part. It uses envelope-followers to detect transients and either boost or reduce detuning at the moment of attack. That's a genuinely unusual feature at any price point. The developer says smooth detuning holds even at extreme settings, and that higher phasiness values push into less conventional territory.

Where It Fits In Your Workflow

You're finishing a synth pad. It sits fine in solo, but in the mix it disappears into the low-mids and loses presence. You reach for a chorus because you want width and movement, but every option you try either sounds thin or wrecks the attack transient.

That's exactly where Cloud Chorus steps in. Drop it on the pad's insert, dial up some detuning, then use the attack control to keep the front edge of each note clean while the tail blooms outward. You get width without smear. For bass-heavy sounds, the developer says blending the two detuning modes through the phasiness slider produces a richer, livelier low-end response than a single-mode chorus would.

The 100ms depth ceiling is worth noting as a practical ceiling. You can push into slap-back echo territory, or pull back to something tighter and roomy. Plan around it sitting on synths, guitars, pads, and anything that benefits from ensemble movement. It's VST3 only, so your DAW needs to support that format on Mac.

What It's Genuinely Good At

The phasiness control is the thing we keep coming back to. Most chorus plugins give you rate and depth. Cloud Chorus gives you those plus the ability to blend between detuning modes, which means the texture you get from one extreme isn't the texture you get from the other.

Push the phasiness toward the unconventional end and the result gets strange in a satisfying way. It's not clean shimmer. It's closer to a room that's slightly wrong, and for certain synth sounds that's exactly right.

The attack envelope-follower is brilliant for anything with a defined transient. Set it to clean up the attack and you can run deep detuning without the note onset sounding blurred. Flip it the other way and each attack gets a quick twang before the detuning settles. That second mode works well on plucked strings and clean electric guitar.

And the depth range is wide enough to cover genuine territory. At narrow settings it reads as ensemble shimmer. At the full 100ms it becomes something between a small room and a slapback delay with detune baked in.

The Rough Edges

Honestly? The format restriction is frustrating. VST3 on macOS only means anyone running Logic with AU as their format, or anyone on Windows at all, gets nothing from this plugin. That's not a minor caveat.

If you use a DAW that handles VST3 on Mac, you're fine. But if you're on Logic and have never configured it for VST3, you'll want to check that before getting attached to this one.

The free price removes the financial sting, but the compatibility wall is still a real limit depending on your setup.

Who This Is Really For

  • ✅ Buy if you're on macOS with a VST3-compatible DAW and want a free chorus with real depth control
  • ✅ Buy if you work with pads, synths, or bass-heavy sounds and want detuning that holds at extreme settings
  • ✅ Buy if the attack envelope-follower sounds useful for your transient-heavy sources
  • ❌ Skip if you're on Windows. Full stop.
  • ❌ Skip if your Mac DAW runs AU or AAX only without VST3 support configured
  • ❌ Skip if you need a straightforward, single-mode chorus with simple controls. This one rewards patience with its blending options.

Specs & Technical Details

DeveloperSignalsmith Audio
PriceFree
Plugin FormatVST3
OS SupportmacOS 10.14 Mojave or higher (Mac only)
ActivationN/A
CPU UsageN/A
Trial AvailableN/A
Version ReviewedN/A

Score Breakdown

CategoryScoreNotes
Sound Quality4.5/5Multi-stage design and blendable detuning modes produce genuinely dense, layered results
Value for Money5.0/5It's free. The control set justifies a price tag that isn't there.
Ease of Use3.5/5Phasiness blending and attack envelope-follower reward time spent learning them
Features4.0/5Attack envelope-follower and independent depth/detuning are strong inclusions
CPU EfficiencyN/A/5No data available from developer or owners
Overall4.0/5Smart, free, and genuinely capable, held back only by platform and format limits

Cloud Chorus is the kind of free plugin that makes you annoyed it doesn't support AU. The design thinking is there: independent depth and detuning, a phasiness control that actually changes the character rather than just the amount, and an attack follower that most paid chorus plugins don't bother with. If you're on Mac and your DAW supports VST3, grab it. If you're on Windows or locked to AU, this one isn't for you and no amount of clever design changes that.

Frequently Asked Questions

Does Cloud Chorus work on Windows?

No. Cloud Chorus is macOS only and requires macOS 10.14 Mojave as a minimum. There is no Windows version available, and the developer has not announced one. If you're on Windows, this plugin won't install or run on your system.

What DAWs support Cloud Chorus?

Cloud Chorus ships in VST3 format only. It works in any macOS DAW that supports VST3, including Ableton Live, Bitwig, Cubase, and Studio One. It is not available in AU or AAX formats.

What does the phasiness control actually do?

Phasiness slides between two distinct detuning modes within the multi-stage chorus design. At one end you get one character of movement, at the other end a different one, and blending between them produces a richer, more complex texture. The developer says higher phasiness values push into less conventional, less smooth territory, which works well for experimental or bass-heavy sounds.