Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
MORG Germ Italiano 75 Black Friday pricing is 40% off this EQ plugin from Evertone Project, which puts it at $50.40 until Nov 30, 2026.
It is a capture of a rare vintage 3-band equalizer and preamp built around germanium-transistor circuitry.
The maker says it keeps the raw character of two distinct commercial studio hardware units. The low and high response curves are fixed, and there is no smoothed-out response layered on top.
You get three bands: a low shelf, a high shelf and a boost-only presence band. Each one moves in 12 steps, the way a hardware panel with detents would.
The presence band is a midrange bell with five selectable centre frequencies: 0.7 kHz, 1 kHz, 1.5 kHz, 2.3 kHz and 3.5 kHz.
If you would rather sweep than click, a STEP toggle switches the knobs from stepped to continuous. Stepped is the default.
The plugin recreates the nonlinear saturation, transient rounding and tone of vintage germanium electronics.
DRIVE is level-compensated, so you can push harmonic depth up without the output jumping in volume. An optional SAT mode takes it further into hard-driven germanium fuzz and bite.
The EQ can be bypassed on its own while the preamp coloration stays in the chain.
You can pick hardware Unit #1 or Unit #2. Engage PAIR and the plugin runs both together as a true dual-unit stereo setup.
There is also phase inversion, plus Full and Lite quality modes. Lite is there to help when a session gets heavy on CPU.
For anyone hunting a vintage EQ plugin or a germanium preamp VST in the Black Friday plugin deals, this is the MORG Germ Italiano 75 in full.
Yes. The MORG Germ Italiano 75 Black Friday deal takes 40% off this Evertone Project EQ plugin, so it costs $50.40. The offer runs until Nov 30, 2026.
It has a BASSI low shelf from -20 to +15 dB, an ALTI high shelf from -24 to +15 dB, and a boost-only PRESENZA band from 0 to +8 dB. The presence bell sits at 0.7 kHz, 1 kHz, 1.5 kHz, 2.3 kHz or 3.5 kHz.
Yes. You can choose hardware Unit #1 or Unit #2, or switch on PAIR to run both as a true dual-unit stereo configuration. PAIR gives you both captured units working together on one signal.
DRIVE adjusts harmonic depth with level compensation, so the volume stays steady as you push it. SAT mode is optional and adds hard-driven germanium fuzz and bite. The EQ can be bypassed while the preamp coloration stays on.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.