
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The Echo Cat Black Friday deal takes 50% off Wavesfactory's tape echo plugin, so the delay costs $39 until Dec 1, 2026.
Echo Cat is a delay plugin built on the Copicat tape echo, a unit Charlie Watkins invented in 1958. Wavesfactory pairs the old behaviour with modern tools like ducking, M/S processing and tempo sync.
The Copicat was designed mainly for guitar and appeared on countless records from the '60s and '70s. The Shadows and Pink Floyd are among the bands that used it.
It simulates the tape loop, the record and erase heads and the three playback heads of the original hardware. Wavesfactory says it modelled the sound by analysing a high number of signals run through a real Copicat.
Drive the input and you get a crushed tape sound. Push sustain to 100% and the echo self-oscillates, the way the original does.
The plugin is split into sections, and each one covers a different part of the tape machine:
Three LEDs on the Heads page show whether signal is reaching the selected head.
Ducking pulls the wet signal down while the dry signal is playing, so the repeats stay out of the way of the main part. You can duck the full stereo image or only the mid channel.
The Master section also lets you run Echo Cat in mono, stereo or fake stereo. Fake stereo adds a 5ms delay in the right channel only.
Filters sit on the feedback path too, so you can darken or thin out each repeat as it recirculates.
Echo Cat is 64-bit only and will not run on 32-bit systems.
Wavesfactory states that Echo Cat is not affiliated with, sponsored or endorsed by WEM or any other brand. The Copicat, WEM and Watkins names are used only to identify the hardware it emulates.
Yes. The Echo Cat Black Friday deal takes 50% off Wavesfactory's tape echo plugin, bringing it to $39. The offer runs until Dec 1, 2026.
Echo Cat is a tape echo delay plugin from Wavesfactory. It emulates the Copicat, a hardware delay Charlie Watkins invented in 1958, with a tape loop, record and erase heads and three playback heads.
Echo Cat from Wavesfactory also covers mid/side handling, delay lengths locked to the host tempo and EQ shaping inside the feedback loop, along with varispeed, modulation, a stereo widener and ducking. Ducking works on the full stereo image or on the mid channel only.
On Mac it needs macOS 10.9 or higher, with Intel and Apple Silicon supported natively. On Windows it runs on 7, 8 or 10. You need a 64-bit DAW that hosts VST or VST3, or Pro Tools.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.