
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The BlackToms 2 Black Friday deal covers this Wavesfactory tom library for Kontakt, 50% off at $29.50 until Dec 1, 2026.
BlackToms 2.0 is an epic toms library for Kontakt. It holds up to 21 layers of three tom types, low, mid and high, all played in a dry studio environment.
It is an updated take on a library first released in 2012 under the same name. This version brings new recordings, a new interface and a new script.
The library is 1.58 GB and holds 1,729 samples. There are 2 mic positions, 6 velocity layers and 6 round robins.
The interface is simple, and the mod-wheel adds more tom layers as you push it.
The mixer controls the two mic positions separately. Close was recorded in stereo with two Sennheiser 421. Far uses two spaced AKG 414 placed at the back of the room.
Each channel gets a load/purge switch, pan, volume, mute/solo and a stereo width control that runs from 100% stereo down to mono. An output selector sends the channels to separate tracks in your DAW, so you can bus them however you like.
The effect script gives every channel 8 slots, and any effect can go in any slot. The maker lists high-quality EQ, several compressor types, chorus, flanger and phaser, distortion, saturation and tape, and amp simulators.
Reverb comes in algorithmic and convolution flavours, with more than 40 custom impulse responses. The maker says the script multiplies what the library can do sonically.
The settings page has four sections.
The Extra control adds a sub-octave layer. The maker says it makes the lower toms sound like taikos and gives the overall sound a fuller, more epic weight.
BlackToms 2.0 needs the full version of Native Instruments Kontakt 5.7.3 or above. In the free Kontakt Player engine it runs in demo mode only.
Yes. The BlackToms 2 Black Friday deal takes 50% off this Wavesfactory Kontakt library, which brings it to $29.50 until Dec 1, 2026. It is a toms instrument with up to 21 layers, a built-in mixer and an effect script.
No, not in full. The library needs the full version of Kontakt 5.7.3 or above. Loaded in the free Kontakt Player engine, it only runs in demo mode, so a full Kontakt install is required for normal use.
It holds 1,729 samples in 1.58 GB, with low, mid and high toms, 2 mic positions, 6 velocity layers and 6 round robins. There is also a full mixer, an effect script with 8 slots per channel and a settings page.
Each channel has 8 effect slots. The maker lists EQ, several compressors, chorus, flanger, phaser, distortion, saturation, tape, amp simulators, and algorithmic and convolution reverb with more than 40 custom impulse responses.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.