Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The vrev 63 Black Friday deal from Fuse Audio Labs takes 67% off the VREV-63 Surf Spring Reverb plugin, bringing it to $19 until Dec 6, 2026.
The VREV-63 is a modern take on the tube-driven spring reverb of the sixties, the box behind the classic surf guitar sound. Fuse Audio Labs lists it with Hang Loose Surf Sound, Inc.
The maker describes the sound as drippy and splashy, with long reverb tails. Put it in front of an amp and it has fed reggae, dub, garage, rockabilly, jazz and spaghetti western records.
The Dwell knob sets reverb intensity and time. It does this by controlling how hard the input signal hits the springs.
The Tone control pulls the treble back until the brightness sits where you want it.
The maker lists these controls and options:
The tone suck comes from the emulated tone and mixer circuits. Fuse Audio Labs calls it a key part of the lush sound, and you can switch it off.
The mods mirror the popular hardware tweaks of the original. Swapping tubes or springs changes the character without leaving the plugin.
The maker also points out you can kick the reverb all night without hurting any hardware. In a plugin, the spring-crash gag costs you nothing.
Fuse Audio Labs says the VREV-63 is not limited to surf or twangy splatter sounds. The maker reports it sounds good on synths, vocals, strings and many other instruments.
That makes it a send candidate for more than guitar. Dial in the Dwell, trim the highs with Tone, and let the long tail do the work.
**Mac (64-bit only)**
**Windows (32- and 64-bit)**
Yes. The VREV-63 Surf Spring Reverb from Fuse Audio Labs is 67% off at $19 until Dec 6, 2026. It is a plugin version of the sixties tube-driven spring reverb, with Dwell and Tone controls and a switchable tone suck effect.
Dwell sets reverb intensity and time. It controls how hard the input signal hits the springs, so higher settings give a splashier, longer wash. The separate Tone control then dials the treble back to the brightness you want.
You can fit a C10 capacitor mod to get a fuller, deeper reverb, swap in either a NOS 6K6 or the hotter-running 6V6 as the driver tube, and pick from three different spring tanks. The tone suck effect on the highs can be switched on or off.
The VREV-63 loads in VST2, VST3 and AAX hosts on Windows and Mac, plus AudioUnits on Mac. Windows needs Windows 7 or newer and 2GB RAM. Mac needs macOS 10.12 or newer, 2GB RAM and an Intel or Apple Silicon CPU.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.