
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The Tapes M400 Black Friday offer is 50% off, $12 until Dec 6, 2026, on a Kontakt Mellotron library from Loot Audio, sampled from a Mellotron M400.
The M400 is one of the earliest Mellotron models, dating from the 1970s. Tapes M400 captures it as a Kontakt instrument, so the tape sound sits right in your DAW.
It is a Mellotron library, sampled chromatically from the M400. The maker says it covers the three main and most iconic Mellotron sounds.
Those three sounds are Strings, Choir and Flutes. Each one was recorded chromatically for the full length of its tape.
Play them the classic way, or loop them if you want a sustained pad from a single held note.
Here is what the library contains:
The maker says the effects are meant to match the old sound of the 70s.
The menu page puts the main settings in one place, so you can dial in a patch without digging through menus.
The mechanical noise control sets how much of the machine's own noise stays in the signal. Combined with the filters and sends, that gives you room to go from a raw tape tone to something more shaped.
Loot Audio says the library suits musicians after the raw sound of the early Mellotron, plus extra effects and sound design tools on top.
Tapes M400 needs the full version of Kontakt 6.6.0 or above.
It will not function with the free NI Kontakt Player. If you only have the Player, this library will not load.
Yes. The Tapes M400 Black Friday deal takes 50% off, bringing the Mellotron library to $12, and it runs until Dec 6, 2026. It is a Kontakt instrument from Loot Audio, sampled from the Mellotron M400.
It has the three main Mellotron sounds: Strings, Choir and Flutes. Each was recorded chromatically for the full length of its tape. You can play them the classic way or loop them. The library holds 105 samples at 48 kHz/24 bit.
There are 5 effects: Chorus, Rotator, Tape Delay, Reverb and cabinets, with 11 cabinet types to choose from. The maker says they match the old sound of the 70s. Reverb and delay send levels are adjustable on the menu page.
No. Tapes M400 needs the full version of Kontakt 6.6.0 or above, and it will not function with the free NI Kontakt Player. The library is 280 MB in size.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.