ShapeShifter + Tectonic Bundle by Aberrant DSP, Black Friday deal on the effects plugin bundle
Black Friday 2026 · sale ends Nov 30, 2026

ShapeShifter + Tectonic Bundle Black Friday Deal 2026: $24, 33% off

$24 $36 -33%
Aberrant DSP · Effects Bundles · Sold by Plugin Boutique. Price checked Nov 9, 2026.
Get this deal at Plugin Boutique

Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy

Know a producer who wants this?
Sends: "ShapeShifter + Tectonic Bundle: $24, 33% off at Plugin Boutique until Nov 30, 2026" and a link to this page.
Salvatore Tomaselli
By Salvatore Tomaselli · Senior Editor
Drafted with AI assistance How we review

The ShapeShifter Tectonic Black Friday deal bundles two Aberrant DSP effects plugins for $24, which is 33% off until Nov 30, 2026.

ShapeShifter is a dynamics remodeler and character compressor. Tectonic is a multi-band channel strip that combines EQ, imaging and dynamics.

Both plugins lean on upward and downward compression to change how a sound is shaped, rather than only turning peaks down.

What does ShapeShifter do?

The maker says ShapeShifter was inspired by the NR Comp algorithm from SketchCassette. Using several frequency bands, it can both squash and lift levels, which gives you a set of tools for building warmth, weight and texture.

The range runs from a subtle vibe boost to what the maker calls blown-open, raucous carnage.

The feature list:

  • Upward and downward compression controlled by one shared Ratio
  • A Transients section with its own Ratio and Threshold, giving separate control of the downward compression
  • An upward compression Floor control for taming room sound or unwanted noise
  • Attack and Release controls for envelope shaping
  • A Tone control for broad shifts in colour and character
  • A Drive control with two models: A (gentle) and B (hard)
  • An Asymmetry control that brings in even-order harmonics for harsher, grittier drive
  • A Dry / Wet mixer for parallel processing
  • 64 factory presets

What does Tectonic do?

Tectonic is a toneshaping channel strip with four bands of upward and downward compression. The maker pitches it for anything from light sweetening to a full tonal rework.

The band behaviour depends on the direction you push it. Boosting a band applies upward and downward compression together, while cutting a band applies downward compression only.

Other features:

  • Trim gain of -12 dB to 12 dB per band
  • A selectable transition frequency between each pair of neighbouring bands
  • Mute, Solo and processing Bypass on every band
  • A Mid / Side panner per band, so each frequency range can be narrowed or widened on its own
  • Master mix, input gain and output gain
  • Six style selections that change the feel and intensity of the dynamics processing
  • 65 factory presets

Formats and system requirements

On Windows 10 or later, both plugins come as 64-bit VST3 and AAX.

On macOS, they run from 10.12 Sierra through macOS 13 Ventura, on Intel or Apple Silicon, as 64-bit AU, VST3 and AAX.

Restart your DAW before loading the plugins into a project. On macOS, some hosts may need a computer restart before the new plugins show up.

ShapeShifter + Tectonic Bundle Black Friday deal: questions

Is the ShapeShifter Tectonic bundle on sale for Black Friday?

Yes. The ShapeShifter + Tectonic Bundle from Aberrant DSP is 33% off for Black Friday, bringing it to $24. The offer runs until Nov 30, 2026 and covers both plugins in a single purchase.

What is included in the ShapeShifter + Tectonic Bundle?

Two effects plugins from Aberrant DSP. ShapeShifter is a dynamics remodeler and character compressor with 64 factory presets. Tectonic is a four-band toneshaping channel strip combining EQ, imaging and dynamics, with 65 factory presets.

What formats do ShapeShifter and Tectonic come in?

Windows 10 or later gets 64-bit VST3 and AAX. macOS 10.12 Sierra through macOS 13 Ventura, on Intel or Apple Silicon, gets 64-bit AU, VST3 and AAX. Restart your DAW before loading them into a project.

How does the compression in Tectonic work?

Tectonic has four bands of upward and downward compression. Boosting a band applies both types, while cutting a band applies downward compression only. Each band also has trim gain of -12 dB to 12 dB and its own Mid / Side panner.

Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.