Radiator by Soundtoys tube saturation plugin interface for the Black Friday deal
Black Friday 2026 · sale ends Dec 3, 2026

Radiator Black Friday Deal 2026: $39, 60% off

$39 $99 -60%
Soundtoys · Saturation Plugins · Sold by Plugin Boutique. Price checked Nov 21, 2026.
Get this deal at Plugin Boutique

Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy

Know a producer who wants this?
Sends: "Radiator: $39, 60% off at Plugin Boutique until Dec 3, 2026" and a link to this page.
Salvatore Tomaselli
By Salvatore Tomaselli · Senior Editor
Drafted with AI assistance How we review

Radiator Black Friday pricing brings Soundtoys' tube saturation plugin to $39, which is 60% off, with the deal running until Dec 3, 2026.

It is a dual drive tube input channel and EQ, based on the Altec 1567A tube mixer from the 1960s.

What is Radiator?

The original 1567A was a rack-mounted five-input tube mixer with removable transformers and a two-knob EQ. It had a green faceplate and 97 dB of gain.

Radiator has a coloured, gritty tone and carries a good deal of hardware noise. Soundtoys lets you decide whether that noise stays on or off.

The Radiator VST and AU plugin puts that character on every channel in your DAW, without interfacing to any outboard gear.

Why the Altec 1567A matters

Altec's 1566A and 1567A helped shape the early Motown sound between 1961 and 1964. Songs by The Four Tops, The Marvelettes and The Supremes went through a 1567A into a three-track recorder.

Motown chief engineer Russ Terrana used the unit extensively. Producer Matt Wallace is a big fan, and Butch Vig and Billy Bush are too.

What is inside the plugin

Soundtoys says Radiator captures the warmth and punch of the original hardware. These are the main parts:

  • Bass and treble tone controls that model those found on the original hardware
  • A mix control for parallel processing
  • Saturation and harmonic effects from the original input and output amplifiers
  • Independent input and output amplification stages, each with its own character
  • A Mic/Line switch that loads the transformers two different ways
  • Little Radiator, a single-stage tube pre-amp model based on the Altec 1566A

The circuit elements interact, so a few simple knobs cover a wide range of tones.

Formats and requirements

On Mac you need macOS 10.12 Sierra or later, with Intel and Apple Silicon both supported. Formats are VST2, VST3, AU, AAX Native and AAX AudioSuite.

On Windows you need Windows 7 or later in 64-bit, with VST2, VST3, AAX Native and AAX AudioSuite. Sample rates run from 44.1 kHz to 192 kHz.

A free ilok.com account is required. A physical USB iLok is not.

Watch: Radiator

Play video: Radiator & Little Radiator: Introduction

Radiator Black Friday deal: questions

Is Radiator on sale for Black Friday?

Yes. The Radiator Black Friday deal takes 60% off the Soundtoys plugin, bringing it to $39. The offer runs until Dec 3, 2026. It is a dual drive tube input channel and EQ based on the Altec 1567A tube mixer.

What is included in Radiator?

Radiator is the dual drive tube channel and EQ, with modelled bass and treble controls, a mix control for parallel processing, and input and output amplifier saturation. It also includes Little Radiator, a single-stage tube pre-amp model based on the Altec 1566A.

What formats does Radiator come in?

On Mac it comes as VST2, VST3, AU, AAX Native and AAX AudioSuite. On Windows it comes as VST2, VST3, AAX Native and AAX AudioSuite. Both platforms are 64-bit only, and a free ilok.com account is required.

What DAWs does Radiator work with?

Supported hosts include Pro Tools 12 or higher, Logic Pro X 10.7 or higher, Ableton Live 10 or higher, Studio One 4.5 or higher, Cubase 9.5 or higher, Nuendo 8 or higher, Reaper 6 or higher and Bitwig 4 or higher.

Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.