Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The Pumper 3 Black Friday deal takes 60% off this dynamics processor plugin from W. A. Production, bringing it to $15.60 until Nov 29, 2026.
Pumper 3 puts a compressor, a saturator and a stereo imager into a single plugin. It is the sequel to the original Pumper, and the maker calls it their most requested update ever.
The idea is to shape the punch and power of a sound without building a signal chain out of separate plugins.
Each of the three modules has its own input control, so you balance the effects against each other inside one window. A real-time waveform display shows your audio before and after processing, which makes A/B checks straightforward.
W. A. Production says the team has been using it to beef up kicks, expand synth lines and widen guitars.
There are 4 compression modes:
New in Pumper 3 are adjustable wet/dry parallel compression and RMS shaping controls. That means parallel compression in the box, with no extra bus or send routing.
The saturator runs from subtle warmth and depth up to harder-edged distortion. Rise and Fall settings shape the transients and smooth the character of the saturation.
The stereo imager adds width and depth. Pumper 3 introduces Low and High shelf modes, plus frequency and resonance controls, so you can aim the width processing at a specific frequency range instead of the whole signal.
It runs on Windows 8 or later (32 and 64-bit) and macOS 10.13 or later (64-bit only). The AAX version needs Pro Tools 11 or higher.
If you are on a Mac with Apple Silicon, the maker points to a compatibility status page for the plugin. Review it before buying.
You can save your own settings as user presets alongside the factory ones, and all presets are reachable from the plugin menu.
Yes. The Pumper 3 Black Friday deal takes 60% off, bringing the plugin to $15.60 until Nov 29, 2026. It is a dynamics processor from W. A. Production that combines a compressor, a saturator and a stereo imager.
Pumper 3 includes three modules: a compressor with 4 modes, a saturator and a stereo imager. It also has 50 factory presets, per-module and master gain controls, a real-time waveform display, a full PDF manual and a tutorial video.
It runs on Windows 8 or later (32 and 64-bit) and macOS 10.13 or later (64-bit only). The AAX version requires Pro Tools 11 or higher. Mac Apple Silicon users should review the maker's compatibility status page before purchasing.
Yes. Pumper 3 has adjustable wet/dry parallel compression plus one-click parallel compression, alongside RMS shaping controls. The maker says this lets you work in the box without complex channel audio routing.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.