
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The pro c Black Friday deal covers FabFilter's Pro-C 3 compressor plugin, which comes to $149 after 25% off, until Dec 1, 2026.
Pro-C 3 is a stereo and surround compressor. The maker says it handles mastering control, mixbus glue, opto-style warmth, upward dynamics and hard pumping from one plugin.
The core is a dynamics engine with 14 compression styles, sorted into Modern, Classic and Utility categories. Six of them are new in version 3:
Character modes add analog saturation, coloring and drift. You can pick Tube, Diode or Bright, set the Drive amount, and choose whether the saturation sits before or after the compression.
Oversampling goes up to 32x, which cuts aliasing when you compress fast or push the Character Drive hard.
Auto Threshold keeps the compression consistent when the input level jumps around. The maker points to dialog as a typical case.
Lookahead reaches 20 ms, and a global Maximum Lookahead control lets you cap the overall latency. Hold can be used for transparency or for pumping, and Range limits the maximum gain reduction.
The knee is variable up to 72 dB of soft knee. Auto Release is program-dependent, and Auto Gain is aware of mid-only and side-only processing.
TTM handles upward compression and combined upward/downward multiband dynamics.
The side-chain EQ uses Pro-Q filter shapes, including all-pass. Slopes go up to 96 dB/oct, with brickwall high-pass and low-pass options, and the filtering can be configured freely across multiple bands.
Triggering has several routes:
Surround support runs up to 9.1.6 Dolby Atmos. Linking is adjustable across stereo pairs or all channels, with Center linking and groups for Sides, Tops and LFE.
The animated level display shows incoming and processed audio plus gain reduction. An optional knee display visualizes how Threshold, Ratio, Knee and Range interact.
Metering covers peak and loudness, with Momentary readings that follow EBU R128 and ITU-R 1770. A Compact layout hides the large displays and leaves the essential meters.
The preset browser has folders, search, tags, metadata and favorites. You can copy and paste settings between instances from inside it, set a default with Save As Default, and load presets by MIDI Program Change.
Pro-C 3 also works with the Pro-Q 4 Instance List (from Pro-Q 4.10), alongside Pro-G and Pro-DS.
From the usual FabFilter toolkit you also get MIDI Learn, undo/redo, A/B comparison, Smart Parameter Interpolation and sample-accurate automation of all parameters.
Formats are VST, VST3, CLAP, Audio Units, AAX Native and AudioSuite.
Yes. The Pro-C 3 Black Friday deal takes 25% off FabFilter's compressor plugin, bringing it to $149. The offer ends Dec 1, 2026.
You get 14 compression styles, including six new in version 3, plus Character modes with Tube, Diode and Bright saturation. Also included: Auto Threshold, a Pro-Q-style side-chain EQ, MIDI and host-sync triggering, surround up to 9.1.6 and 32x oversampling.
Pro-C 3 is available as VST, VST3, CLAP, Audio Units, AAX Native and AudioSuite. That covers the common plugin hosts on both sides of the format divide, with AAX Native and AudioSuite for Pro Tools.
Yes. The maker lists immersive surround processing up to 9.1.6 Dolby Atmos. Linking can run across stereo pairs or all channels, with Center linking and adjustable groups for Sides, Tops and LFE.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.