
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The PolyM Black Friday deal takes 70% off XILS Lab's divide-down polyphonic synth plugin, bringing it to $59 until Dec 31, 2026.
PolyM is a software synthesizer built around top octave divider oscillators, the technology first used in organ synths and later adapted for more versatile instruments in the '70s. XILS Lab says it spent more than two years modelling the 71 components of the original machine.
It is a plugin only. PolyM is not a stand-alone application, so it needs a VST, AU or AAX host.
A single high-frequency oscillator is divided into the 12 tempered scale intervals of an octave, then divided again by multiples of 2 for the lower octaves. Every note is locked to that one oscillator and plays with the same relative phase.
The maker says this gives chords, strings and pads a character you won't find in other synthesizers. PolyM adds polyphonic pulse width modulation on top, and its two oscillators are aliasing-free: one for sawtooth, one for square.
In FREE mode the two oscillators run independently for small or huge phasing. In LOCK mode they stay almost locked in phase, which produces phase modulation instead of frequency modulation.
The keyboard splits into Lower and Upper parts. For each, you can set PWM, waveform mix and envelope decay on its own.
Each note gets its own 12dB filter driven by its own ADSR, and the filter type switches between low pass, high pass and band pass. The envelope runs in LEGacy mode, tuned to match the original, or as a standard ADSR.
The Master Gain control lets you hear the signal at different stages: the direct oscillator mix, after the MODE acoustic filters, after the resonator bank, or after the 24dB filter.
V1.5 added more GUI sizes, Apple M1 compatibility and a VST3 version. It also brought a new arpeggiator with extended modulation and factory presets from Zensound (Adrian Jimenez), Daniel Stawczyk and Adam Borseti.
Global A3 tuning is now a quick setting, whether you want 440Hz, 432Hz or something else. Octave changes are easy too.
On Mac, PolyM needs OS X 10.9 or later, and it is Apple M1 compatible. Formats are VST2.4, VST3, Audio Unit and AAX Native, 64-bit only.
On Windows, it runs on Windows 7, 8 and 10 as VST2.4, VST3 or AAX Native, in both 32-bit and 64-bit.
Yes. The PolyM Black Friday deal takes 70% off XILS Lab's synth plugin, bringing it to $59, and it ends Dec 31, 2026.
On Mac it comes as VST2.4, VST3, Audio Unit and AAX Native, 64-bit only. On Windows you get VST2.4, VST3 and AAX Native in 32-bit and 64-bit. It is not stand-alone and needs a compatible host.
The synth has two Top Octave Divider oscillators, a 24dB ladder filter, 9 acoustic filters, a 3-filter resonator bank, and Delay, Phaser, Reverb and Chorus effects. Three LFOs, 9 modulation slots and more than 440 presets are on board.
Each oscillator divides one high-frequency source into the 12 scale intervals of an octave, so every note shares the same phase. In FREE mode the two run independently for phasing. In LOCK mode they stay almost phase-locked.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.