PeakLimit limiter plugin by Plugin Boutique, Black Friday deal
Black Friday 2026 · sale ends Nov 29, 2026

PeakLimit Black Friday Deal 2026: $10, 83% off

$10 $59 -83%
Plugin Boutique · Limiter Plugins · Sold by Plugin Boutique. Price checked Nov 21, 2026.
Get this deal at Plugin Boutique

Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy

Know a producer who wants this?
Sends: "PeakLimit: $10, 83% off at Plugin Boutique until Nov 29, 2026" and a link to this page.
Salvatore Tomaselli
By Salvatore Tomaselli · Senior Editor
Drafted with AI assistance How we review

The PeakLimit Black Friday deal from Plugin Boutique takes 83% off this limiter plugin, so it comes to $10 until Nov 29, 2026.

PeakLimit sits at the end of the mastering chain, the stage where a finished mix gets its final loudness. It offers 4 limiter styles and a metering display that shows levels and dynamics as you work.

The maker says it can raise the loudness of a track, limit peaks so the volume goes up without clipping, and help you tune loudness for streaming platforms. It can also add colour and punch to single instruments.

What do PeakLimit's limiter styles do?

The style switch changes how the limiter treats the signal. The maker lists these:

  • Lucid: transparent limiting that leaves the tonal balance alone.
  • Warm: a slight lift in the low end for a deeper, fuller sound.
  • Punch: emphasis on dynamics, which the maker says works especially well on single tracks.
  • Bright: the fourth style, named in the feature list.

On top of that, three transient modes (Soft, Hard and Transparent) decide how transients are handled.

Lookahead and sensitivity controls let you fine-tune how hard the limiter works on your source material. Adaptive release control is part of the feature list too.

You are not stuck on the master bus. PeakLimit isn't restricted to the master channel: the developer points to busses and groups as targets too, along with single drum, bass, guitar and synth tracks, where it can control spikes, bring out attack and add some tone.

What does the metering show?

The metering runs in real time. It shows the exact gain reduction being applied, the RMS level for the left and right channels, and the output waveform.

Built-in LUFS, RMS and Peak readings give you live loudness numbers. That is where you check streaming loudness and make sure nothing clips.

What else is in the feature list?

  • Up to 8x oversampling
  • Real-time RMS and gain reduction displays
  • 50 presets
  • A preset manager to save and share your settings
  • An interface the maker describes as intuitive and easy to navigate

Formats and system requirements

On macOS, PeakLimit needs macOS 10.15 or higher and runs natively on Apple Silicon. Formats are VST, VST3, AU, AAX and Standalone.

On Windows, it needs Windows 7 or higher, in VST, VST3, AAX and Standalone. Both platforms are 64-bit only.

Supported DAWs include Ableton Live, Pro Tools, FL Studio, Cubase, Nuendo, Reaper and Reason, plus more. Logic Pro is listed for macOS.

If you get it through a Rent to Own plan or the Beatport Studio membership, it installs and runs through the Beatport Access portal. That route needs an internet connection every 30 days to validate your license.

Watch: PeakLimit

Play video: PeakLimit - Complete your Mastering Chain!

PeakLimit Black Friday deal: questions

Is PeakLimit on sale for Black Friday?

Yes. The PeakLimit Black Friday deal is 83% off, which brings the limiter plugin to $10, and it runs until Nov 29, 2026. It is sold by Plugin Boutique.

What is included in PeakLimit?

PeakLimit includes 4 limiter styles, 3 transient modes, adaptive release, lookahead and sensitivity controls, and up to 8x oversampling. You also get real-time LUFS, RMS and Peak metering, 50 presets and a preset manager.

What formats does the PeakLimit VST come in?

On macOS, PeakLimit comes as VST, VST3, AU, AAX and Standalone, and runs natively on Apple Silicon. On Windows, the formats are VST, VST3, AAX and Standalone. Both versions are 64-bit only.

What DAWs does PeakLimit work with?

The maker lists Ableton Live, Pro Tools, FL Studio, Cubase, Nuendo, Reaper and Reason, plus more. Logic Pro is supported on macOS. Windows needs Windows 7 or higher, macOS needs 10.15 or higher.

Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.