
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
The FabFilter Pro-Q 4 Black Friday deal takes 25% off this 24-band EQ plugin, so it costs $149 until Dec 1, 2026.
Pro-Q 4 is an equalizer plugin from FabFilter, first released as Pro-Q in 2009. Version 4 adds spectral dynamics, an instance list, EQ Sketch and vintage saturation.
If you already own an earlier Pro-Q, FabFilter runs a separate upgrade path. Anyone who bought Pro-Q 3 after 13 October 2024 gets Pro-Q 4 in their FabFilter account automatically.
You get up to 24 EQ bands on one large interactive display. Click to create a band where you need it, switch any band to dynamic EQ, and select and edit several bands at once.
Phase behaviour is your choice: zero latency, Natural Phase or linear phase. Each band can run in stereo or mid/side, and an intelligent solo mode isolates the band you're working on.
A spectrum analyzer is built in and fully customizable. Auto Gain is optional, and the display range switches between 3 dB and 6 dB for mastering and 12 dB and 30 dB for mixing.
Surround is covered up to Dolby Atmos 9.1.6, depending on your DAW and plugin format. The interface adapts to the channel format when you load it on a surround channel.
The maker says EQ Sketch is meant for a quick starting curve, a few low cuts, bells and shelves, not for precise band-by-band work. It pairs with the instance list when you set up a session.
Any Bell or Shelf band can be made dynamic at any slope, including in linear phase mode. Attack, release and knee follow the audio, the band's frequency range and the current dynamic range.
In normal dynamic mode, the gain of the whole band follows the input level. In Spectral mode, only the frequencies that exceed the threshold are triggered, and the rest of the band is left alone.
The maker says this replaces what usually needs a separate, more complex plugin. It suits problem frequencies that move around.
The piano display swaps the frequency scale for an 88-key keyboard running from A0 (27.5 Hz) to C8 (4186.01 Hz). Click a band's dot to snap it to the nearest note, or drag it while it stays quantized to notes.
You can also type frequencies as notes, for example "D#5 +13" or "A4", into the Frequency knob.
From Pro-Q 3 it keeps Spectrum Grab, EQ Match, Full Screen mode, GPU-powered graphics and a resizeable interface. Also carried over are double-click value entry, MIDI Learn, undo/redo, A/B comparison and Pro Tools hardware control surface support.
Yes. The Pro-Q 4 Black Friday deal takes 25% off, bringing the EQ plugin to $149 until Dec 1, 2026. This is the full purchase path. Owners of earlier Pro-Q versions have a separate upgrade path.
Customers who bought Pro-Q 3 after 13 October 2024 receive Pro-Q 4 in their FabFilter account automatically. If you bought Pro-Q 3 earlier or own another version, the upgrade path from previous Pro-Q versions applies.
It's a variation on dynamic EQ. Instead of changing the gain of a whole band, Pro-Q 4 triggers only on the specific frequencies within the band that exceed the threshold and leaves the others untouched. The maker says it suits varying problem frequencies.
Yes. It supports surround and immersive formats up to 9.1.6 Dolby Atmos, depending on your DAW and plugin format. On a surround channel the interface adapts to the multi-channel format and the output meter shows every channel with labels.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.