FabFilter Pro-MB multiband compressor plugin Black Friday deal
Black Friday 2026 · sale ends Dec 1, 2026

FabFilter Pro-MB Black Friday Deal 2026: $149, 25% off

$149 $199 -25%
FabFilter · Compressor Plugins · Sold by Plugin Boutique. Price checked Nov 16, 2026.
Get this deal at Plugin Boutique

Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy

Know a producer who wants this?
Sends: "FabFilter Pro-MB: $149, 25% off at Plugin Boutique until Dec 1, 2026" and a link to this page.
Salvatore Tomaselli
By Salvatore Tomaselli · Senior Editor
Drafted with AI assistance How we review

The FabFilter Pro-MB Black Friday deal takes 25% off this multiband dynamics plugin, which comes to $149 until Dec 1, 2026.

Pro-MB handles both multiband compression and expansion. The maker's pitch is that these tools are powerful but hard to set up, and that Pro-MB makes the job intuitive without losing depth.

How does FabFilter Pro-MB split the spectrum?

There are no fixed crossovers to start from. You create a band directly at the frequency range you want to work on, and the multiband display shows that the rest of the spectrum stays untouched.

If you do want a traditional crossover layout, you can snap bands together. The slope of each crossover can be set anywhere from 6 dB/oct to 48 dB/oct.

You get up to six bands, placed freely anywhere in the spectrum.

What does Dynamic Phase mode do?

Dynamic Phase is a processing mode FabFilter introduced with Pro-MB. The maker says its frequency response is virtually the same as traditional multiband processing, with zero latency and no pre-ringing. Phase only shifts slightly when the gain actually changes.

Two other modes sit alongside it:

  • Linear Phase, which removes audible artifacts when you change crossover frequencies quickly
  • Minimum Phase, the traditional approach

Linear-phase oversampling goes up to four times.

What can you set per band?

Each band can be shaped in detail: threshold, range, ratio and variable knee, plus attack, release and output gain, lookahead of up to 20 ms, variable stereo linking with mid-only or side-only processing, an external side chain input, and triggering from a separate frequency range. That flexibility lets the plugin handle anything from subtle, unobtrusive dynamics control to heavily pumping upward compression and tight, punchy gating.

Metering, workflow and formats

A real-time frequency analyzer shows the signal before and after processing, and it has a freeze feature. You also get band solo, mute and bypass, precise output metering and a global dry/wet mix from 0% to 200%.

The usual FabFilter extras are included: MIDI Learn, Smart Parameter Interpolation, undo/redo, A/B comparison, sample-accurate automation and double-click text entry. Internal processing is 64-bit where needed, and the graphics are GPU-accelerated.

On Mac, Pro-MB runs on macOS 10.12 or higher, Intel or Apple Silicon, 64-bit only, in VST2, VST3, AU and AAX Native. On Windows it supports Windows 11, 10, 8, 7 or Vista, 32 or 64-bit, in VST2, VST3 and AAX Native. Stereo and mono versions are available.

Watch: FabFilter Pro-MB

Play video: Introduction to FabFilter Pro-MB Multiband Compressor / Expander

FabFilter Pro-MB Black Friday deal: questions

Is FabFilter Pro-MB on sale for Black Friday?

Yes. The FabFilter Pro-MB Black Friday deal takes 25% off, bringing the plugin to $149. The offer ends Dec 1, 2026.

How many bands does FabFilter Pro-MB have?

Pro-MB offers up to six processing bands, which you can place anywhere in the spectrum. Each band is created at the frequency range you want to work on, and bands can be snapped together to form a traditional crossover system.

What is Dynamic Phase mode in FabFilter Pro-MB?

It is a processing mode unique to Pro-MB. The maker says it has virtually the same frequency response as traditional multiband processing, with zero latency, no pre-ringing and only minor phase changes when the gain changes. Linear Phase and Minimum Phase are also included.

Is FabFilter Pro-MB a VST, and what formats does it come in?

Yes. On Mac it comes as VST2, VST3, AU and AAX Native, and on Windows as VST2, VST3 and AAX Native. Mac support covers macOS 10.12 or higher, Intel or Apple Silicon, 64-bit only. Stereo and mono versions are available.

Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.