
Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy
Drawmer 1973 Black Friday pricing from Softube comes to 65% off, which puts this three-band compressor plugin at $55 until Nov 22, 2026.
The Drawmer 1973 Multi-Band Compressor is a plugin version of the Drawmer 1973 hardware unit, built by Softube together with the Drawmer R&D team. Ivor Drawmer approved the model himself.
The maker says each component of the original is modeled, and the plugin runs as a three-band FET compressor.
It splits the signal into three frequency bands and gives you independent control over each one. Softube says this is often a fix for problem mixes.
On a full mix, you can pull out individual instruments, brighten the top end or tighten the lows. The maker also says you can make a mix wider and louder, or tuck a piano into a dense arrangement.
On single sources, the maker's examples are taming the boomy character of an acoustic guitar, removing sharp consonants from a vocal without losing detail, and curbing an unruly bass guitar.
The plugin keeps the look and sound of the hardware and adds two things the original unit does not have:
Softube describes the GUI as echoing the hardware original, and says the plugin is CPU friendly.
The plugin loads in any 64-bit VST, VST3, AU or AAX host (Pro Tools 11.0.2 or higher). Softube recommends VST3, since some of its plugins have features the older VST format lacks.
Softube officially tests in the most recent versions of Pro Tools, Logic Pro, Cubase, Ableton Live, Studio One and Reaper. Other hosts will likely work if the requirements are met, though the maker does not guarantee fixes there.
Supported sample rates are 44.1, 48, 88.2, 96, 176.4 and 192 kHz, in mono and stereo. Use the latest iLok License Manager, which is not part of the Softube installer and downloads from ilok.com.
Yes. The Drawmer 1973 Multi-Band Compressor from Softube is 65% off, bringing it to $55 until Nov 22, 2026. It is a three-band FET compressor plugin that comes in VST, VST3, AU and AAX formats.
It is based on the Drawmer 1973 hardware three-band compressor. Softube built it in collaboration with the Drawmer R&D team, and Ivor Drawmer approved the model. The maker says each component of the original is carefully modeled.
Yes. With Mid-Side mode, you can compress the centered content of a signal while the side information stays untouched. Sidechaining links the gain reduction to an external source. Softube says neither is available on the original hardware.
It comes as VST, VST3, AU and AAX. Any 64-bit host supporting one of those should work. Softube tests in Pro Tools, Logic Pro, Cubase, Ableton Live, Studio One and Reaper, and recommends VST3.
Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.