Sonnox Broadcast Plugin Bundle Black Friday deal, Oxford EQ, Dynamics, Inflator, Limiter and SuprEsser
Black Friday 2026 · sale ends Dec 17, 2026

Broadcast Plugin Bundle Black Friday Deal 2026: $156, 80% off

$156 $784 -80%
Sonnox · Effects Bundles · Sold by Plugin Boutique. Price checked Nov 9, 2026.
Get this deal at Plugin Boutique

Affiliate disclosure: the "Get this deal" button is an affiliate link to the store. If you buy through it we earn a commission at no extra cost to you. Full policy

Know a producer who wants this?
Sends: "Broadcast Plugin Bundle: $156, 80% off at Plugin Boutique until Dec 17, 2026" and a link to this page.
Salvatore Tomaselli
By Salvatore Tomaselli · Senior Editor
Drafted with AI assistance How we review

The Broadcast Plugin Bundle Black Friday deal from Sonnox is 80% off, bringing the five-plugin Oxford collection to $156 until Dec 17, 2026.

The bundle packs Oxford plug-ins built for broadcast production, with precision control over tone, level and loudness. The maker says it will improve the quality of virtually any programme.

It is a VST, AU and AAX effects bundle, so it drops into most signal chains.

What is in the Broadcast Plugin Bundle?

  • Oxford EQ
  • Oxford Dynamics
  • Oxford Inflator
  • Oxford Limiter
  • Oxford SuprEsser

What do the EQ and Dynamics plugins do?

Oxford EQ is based on the EQ section of the Sony OXF-R3 digital mixing console. It has 5 fully parametric bands, with selectable shelf settings on the LF and HF sections.

Variable low pass and high pass filters add slopes of up to 36dB/octave. Four EQ curve types live in one plugin, including some legacy styles, and the A/B switches are automatable.

Oxford Dynamics comes from the dynamics unit in the same OXF-R3 console. It has separate Compress, Limit, Expand, Gate and side chain EQ sections, each with independent parameters.

Three compressor types use linear and exponential curves, with a variable soft knee. A 2-band side chain EQ has an audition function, and a Warmth control adds presence and tube-like warmth.

How do the Inflator, Limiter and SuprEsser handle loudness and harshness?

Oxford Inflator raises the apparent loudness of a mix without an obvious loss of quality or an audible cut in dynamic range. The maker says it avoids damaging increases in peak level.

It also adds presence and tube-like warmth, and gives virtual headroom above digital maximum. Direct and band-split modes are on board.

Oxford Limiter uses logarithmic side chain processing and adaptive timing with look-ahead. Attack, release and soft knee controls sit alongside an Enhance section that raises perceived loudness.

Its Reconstruction Meter shows the actual signal rather than the sampled signal, and dither with noise shaping is built in. Factory presets are included.

Oxford SuprEsser works as a de-esser and a linear phase dynamic EQ, with a simple mode for quick fixes and an advanced mode for fine-tuning. An FFT display and three listen modes show and let you hear where the problem frequencies are.

It runs across the full 20Hz to 20kHz range, so plosives can be dealt with too. Automatic Level Tracking adapts to the signal's energy on its own, which removes the need to automate the threshold, and a Wet/Dry blend lets you set the final balance.

Watch: Broadcast Plugin Bundle

Play video: Oxford Dynamics tutorial

Broadcast Plugin Bundle Black Friday deal: questions

Is the Broadcast Plugin Bundle on sale for Black Friday?

Yes. The Sonnox Broadcast Plugin Bundle Black Friday deal takes 80% off, putting the collection at $156 until Dec 17, 2026. It covers Oxford EQ, Oxford Dynamics, Oxford Inflator, Oxford Limiter and Oxford SuprEsser.

What is included in the Sonnox Broadcast Plugin Bundle?

Five Oxford plugins: Oxford EQ, Oxford Dynamics, Oxford Inflator, Oxford Limiter and Oxford SuprEsser. Between them they cover equalisation, compression and gating, loudness enhancement, limiting and de-essing for broadcast production.

What formats and DAWs does the Broadcast Plugin Bundle work with?

On macOS it comes as AAX, AU and VST3. On Windows it is AAX, VST2 and VST3. Supported hosts include Pro Tools 11 or above, Logic, Cubase, Nuendo, Ableton Live, Studio One, Samplitude, Sequoia and Pyramix.

Do I need an iLok to use the Broadcast Plugin Bundle?

Yes. To authorize the plugins you can use a physical iLok 2 or iLok 3 dongle, or log into your iLok account while the computer is online. The bundle supports iLok Cloud Authorisation, so a physical dongle is not the only route.

Prices and end dates are checked at publishing time and can change, so confirm them at the store before you buy.