Blast Delay Black Friday Deal 2026: $15, 70% off

Blast Delay Black Friday pricing is 70% off, which puts this delay plugin from Audio Blast at $15 until Nov 30, 2026.

Blast Delay is a delay VST with a parameter sequencer built in. The maker describes it as simple and intuitive.

The sequencer is the headline feature. It lets you program loops of motion for every knob, each with its own speed.

How does the Blast Delay parameter sequencer work?

The sequencer syncs to the host tempo. Each step stands for the value of a parameter as a percentage, from 0 to 100%.

You can sequence every parameter on the plugin. That means pre-programmed motion loops on time, feedback, filter and the rest.

The maker also says you can tweak the effect in live situations and recall all the parameters held in the sequencer.

What controls does Blast Delay have?

Here is what each control does:

• Dry/Wet sets the balance between processed and dry signal, and Volume sets the level of the processed signal.
• Time sets the delay in milliseconds, or from 1 Bar to 1/128 when Sync is on.
• Feedback sets how much of each channel's output returns to the delay line inputs.
• Filter works as a low pass from -100 to 0 and as a high pass from 0 to 100.
• Ping Pong bounces the signal from the left output to the right.
• Freeze loops the delay buffer, so the input signal is no longer processed by the delay.

Two more switches change the character of the repeats. Polarity inverts the phase of the effect by 180°, and the maker says it gets more interesting with low Time values and high Feedback.

Pitch makes the pitch shift as you change the delay time, like the behaviour of old tape delay units.

With Sync off, you edit the time by clicking and dragging up on the Delay Time knob.

What does Blast Delay need to run?

On Mac, you need macOS 10.13 or later. Apple Silicon is supported. An Intel Core i5 or equivalent CPU and 2GB RAM are required.

On PC, you need Windows 7 or later, with the same Intel Core i5 or equivalent CPU and 2GB RAM.

An internet connection is required to install and update the product. If you get it through a Rent to Own plan or the Beatport Studio membership, it installs and runs through the Beatport Access portal. That route needs an internet connection every 30 days to validate your license.