Amp Room ENGL Savage Mark II Suite Black Friday Deal 2026: $29, 70% off

The Amp Room ENGL Savage Mark II Suite Black Friday deal takes 70% off this Softube amp simulator plugin, so it costs $29 until Nov 8, 2026.

It is an officially licensed suite built around the ENGL Savage Mark II high-gain head. You get both the 120W and 60W versions of the amp, five ENGL cabinets, four pedals and studio effects.

What is in the Amp Room ENGL Savage Mark II Suite?

• 120W and 60W Savage Mark II amp heads
• Five ENGL cabinets, from 2x12 to an XXL 4x12
• Four pedals
• Studio effects

The two heads differ in the power section. The 120W uses ENGL 6550 power tubes, while the 60W (shown in white, limited edition tolex) uses ENGL EL34 tubes for a different tonal choice.

How does the Savage Mark II amp work?

The Savage Mark II has four channels. Channel 1 and Channel 2 each get a 3-band EQ retooled by ENGL designer Horst Langer, with Lean/Bold circuits that give two distinct midrange characters.

The Gain Lo/Hi circuit turns the Clean channel into a Crunch mode in the Hi setting. On the Lead channel, the same switch adds richness and weight.

Which cabinets are included?

The five cabs cover a range of speakers and sizes:

• E412XXL BK 4x12 with Celestion Vintage 30
• E412SGB Standard 4x12 with Celestion Vintage 12-60, which the maker describes as slightly scooped mids and tempered lows
• E212VHB Pro 2x12 with Celestion Vintage 30, which the maker says delivers strong mid-punch
• E412VGB Pro 4x12 with Celestion Vintage 30
• E412RG Retro Tube 4x12, aimed at '60s and '70s hard rock tones with focused mids and rounded lows

That spread gives you a few distinct low-end and midrange shapes to dial in against the heads.

How is it modeled?

Softube says the suite is component-modeled from schematics, with the physical amp hand-measured in a lab. The digital model is then adjusted to follow the hardware's behavior at any knob setting.

The maker also states it was built without artificial intelligence, and says that is why a knob move here corresponds to the real knob on the real amp.

Formats and requirements

The plugin runs as VST, VST3, AU and AAX (Pro Tools 11.0.2 or higher) in 64-bit hosts. Softube recommends VST3, since some of its plugins have features the older VST format lacks.

Apple silicon is supported natively. On Windows you need a quad-core Intel Core i3/i5/i7 or AMD quad-core processor with SSE 4.2 support. Sample rates from 44.1 to 192 kHz work in mono and stereo, and the iLok License Manager is needed.